Clear-Com FreeSpeak II FSII-BP24 wireless beltpack
FreeSpeak II is a multi-channel duplex digital wireless
an intercom system operating in the 1.9 GHz band, which is part of the FreeSpeak® product family.
The FSII-BP24 is a rugged, waterproof beltpack that operates in the license-free 2.4 GHz ISM frequency band. Featuring "Clear-Com Sound," the FSII-BP19 has a wide audio frequency response, ensuring excellent intelligibility and listening comfort.
Action
FSII-BP24 beltpacks can be managed by FreeSpeak Edge Base Stations, Arcadia® Central Stations, and the Eclipse® HX digital matrix equipped with an E-IPA-HX card. FSII-BP24 users can seamlessly switch between FSE-TCVR-24 antennas over very large areas. The "Listen Again" feature allows users to replay previous commands, eliminating the need to repeat communications or interrupt production. The Volume Swap feature allows for independent volume control on channels A, B, C, and D.
Scaling the system
The FSII-BP24 can be used interchangeably with any other FreeSpeak II or FreeSpeak Edge beltpack within the same system. Depending on which system you connect to, you can increase the number of users operating within a single system.
Durability
With an IP53 protection rating, the FSII-BP24 is suitable for use in wet and dusty environments, making it an ideal choice for outdoor production. The rubber components of the housing provide the device with better grip and protect it from harsh operating conditions.
Battery
The BAT60 lithium-ion battery provides over 18 hours of operation. You can also use 3 AA batteries to power the beltpack, which will last for 6–9 hours. Inside the beltpack, there is a USB-C port (cable included) for charging or continuous power supply. The BAT60 can also be charged using the AC60 charger.
Key features
- Works with FreeSpeak Edge Base, Arcadia Central Station and Eclipse HX via E-IPA cards
- Beltpacks 1.9, 2.4, and 5.0 GHz operate under a single system
• Supports up to 200 beltpacks within a single system
• Volume Swap encoder for adjusting the volume between channels A&C and B&D
• "Listen Again" feature for replaying the last message
• Operation in simple 2-channel partyline mode or 5-channel intercom mode on the same beltpack
• Over-the-air registration
• 2.4 GHz frequency range
• Typical range: 90 meters indoors, 240 meters in open space
- Stable radio communications operating in crowded or highly reflective environments
• The battery provides over 18 hours of operation; power is supplied via a USB port to ensure uninterrupted operation
- IP53 rating against damp and dusty environments
Technical specifications:
Audio
Frequency response: 200 – 7.5 kHz
Number of Full-Duplex Audio Relationships: 5 with individual volume control (2 dedicated rotary controls, 3 available in the menu), 2 volume controls, and master volume
Modes of operation: Full duplex on all channels
Level/Talk control : 4 buttons, 2 rotary controls, and a replay button
Enter/Reply button: 1
Frequency range
EU: 2,400-2,483MHz
Modulation:, TDMA 10-ms frame (Full and Long slots)
Output power: 18–22 dBm
Range 90 m in a typical room, 240 m in an open space
Battery:Lithium-ion or 3 AA batteries
Loading:AC60 drop-in charger or via the USB port
Battery life:Over 18 hours on battery power, 9 hours on 3 AA alkaline batteries
Connectors:
Headset jack: 4-pin male, Clear-Com standard, optional 5-pin female and 7-pin male with PTT
Headset Voltage: Maximum ~+8 dBu, depending on the firmware
Microphone Type: Electret or Dynamic, selectable in the menu
Microphone Voltage: Electret Microphone: -45 dBu (additional bias voltage of 2.5 V DC, positive on Pin 2 and negative on Pin 1 via a 1 kΩ resistor).
Dynamic microphone: -55 dBu
Headset Limiter: Accessible from the menu
Range (Beltpack—Indoor Antenna): 90–150 m
Range (Beltpack—Antenna in Open Space): 240–450 m
Environment
Degree of protection: IP53 water and dust resistant
Operating temperature range: 0º to 50ºC
Storage temperature range: 0º to 70ºC
Humidity: 20-90%, non-condensing
Dimensions 99 x 129.5 x 45.7 mm (W x H x D)
Weight
With battery: 0.25 kg
